AUTONET TV

Rear Window?Not the Movie! (Why Some Rear Windows Don't Go All the Way Down)

Alfred Hitchcock once made a mystery thriller film called "Rear Window." It had nothing to do with the rear window of today's cars, SUVs, CUVs and light trucks.  But there is one thing that some drivers DO find mysterious.  Why don't the rear windows in the second row of many of these vehicles go down all the way?

You've probably seen or owned one or two. That rear side window only goes down about a third, a half or three-quarters of the way. Yet there are some similar vehicles where the window goes down all the way.  What gives?

There was the rumor going around that the restriction on how far those windows could go down was a child safety feature.  The thought was that if those windows couldn't open up fully, a child (or pet) would be less likely to fall out.  But it turns out the real reason is that the way the rear doors were designed, there was just no room for the window to go down all the way into.

Many vehicles are configured so that the rear wheel arch continues into the rear door.  That arch restricts the space that would accommodate the window, so they had to stop the window somewhere higher than bottom of the door.

Seems buyers would prefer those back windows to go all the way down, so many manufacturers are changing designs to make that happen.  Longer vehicles can have their wheels pushed further back so the wheel arch isn't an issue.  Some have altered the position of the rear window track. 

If you have any questions about your rear side windows, you may want to consult your service advisor to check yours.  If they ARE supposed to go all the way down and they're not, it could be due to a few problems: corrosion, broken or bent window regulator components, electrical issues, etc. But if they're not supposed to go down all the way?  At least now you know for sure.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

A Fluid Situation (Check Fluid Levels)

There's one fluid in your car you are always careful to keep at a certain level: the fuel. If you don't have fuel, you're not going anywhere.  Your vehicle has other fluids which are vitally important to proper and safe operation, too.  So, here's a "level" headed approach to those "other" fluids.

Engine oil.  This one's probably the most important fluid to maintain at the proper level. Without enough oil, you'll wear out your engine prematurely.  Sometimes vehicles have warning lights on the dash that will tell you to get your oil checked.  Don't ignore that one; get it checked immediately.  Certainly don't go on a long trip at high speeds with your oil level low. Oh, and it's not good to have too much oil in, either. Our pros at Gilmore's Auto Service can advise you on oil levels and tell if you if you should be concerned about abnormal fluctuations.

Windshield washer fluid.  OK, this is one you probably know about.  You certainly miss it when it runs out.  You find yourself trying to clean your windshield with the wipers but you need a little liquid help.  Unless you live in an area that requires you to use an awful lot of windshield washer fluid, one fill-up can often last between oil changes.  Modern vehicles have large enough windshield washer fluid reservoirs to keep you going for quite a while.    

Engine Coolant. Here's another fluid you need to keep your engine running properly.  You need it to keep the engine running at the proper temperature.  Plus, you'll need it for heat when the temperature gets chilly outside. 

Power Steering Fluid. If you have a vehicle that uses power steering fluid, it's important to keep the correct amount in your system. Without enough of it, you might find steering difficult.  Plus, if you’re losing power steering fluid, our experts at Gilmore's Auto Service can find out why and perhaps prevent a more expensive repair later.

Brake Fluid.  You may have heard of hydraulic brakes.  Hydraulic refers to the fluid and is one of the key reasons your brakes work.  Levels should be checked regularly and, like power steering fluid, if you're losing brake fluid, a technician needs to find out why so you can get the issue repaired and maintain your stopping ability.

If you have regular preventative maintenance performed at Gilmore's Auto Service, we’ll keep an eye on all of these fluids when you bring your vehicle in for service.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

A Clean Sweep (Fuel Injector Cleaning)

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine.

But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine. 

One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to.

If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you bring your vehicle to us, we will connect the flushing equipment, flush out the injectors and reassemble the system.

A good time to have fuel injectors inspected is when you bring your vehicle in for routine maintenance.  An oil change is an ideal time to have a technician take a close look at your entire fuel delivery system. 

When you have your fuel injectors cleaned, you may see your mileage go up, your engine performance improve, and your exhaust emissions decrease.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net

Smooth Operator (Shocks and Struts)

Few of us ever drive somewhere without encountering some pretty rough roads, and it's amazing how well our vehicles are able to smooth out the ride. Thank your shocks and struts.

The two parts are similar.  Some cars have shocks in the rear, and struts in the front.  Others have struts all around.  A shock absorber uses a cylinder filled with gas or liquid that's connected to your vehicle's frame and axle.  When your vehicle encounters an imperfection in the road, the shock dampens the motion. 

A strut is essentially a shock absorber mounted inside a spring and can support more weight than a shock by itself.

Shocks and struts take a lot of punishment and wear out.  When they do, your tires are not contacting the road as much as they should, and that can result in a bumpy, unstable ride. Worn-out shocks and struts also transfer the impacts of road imperfections directly to your vehicle's body which can cause further damage to other parts.

You can tell when your shocks and struts are wearing out when your vehicle's ride is bouncy, you feel the bumps and body motion a lot more than you used to, or you may see fluid leaking from the areas near the wheels.

How often your shocks and struts need replacing depends on what surfaces you drive on, how far they've traveled, and how long they've been on the vehicle.  Our technicians can check the condition of your shocks and struts and advise you when they need to be changed.  Shocks and struts should always be changed in pairs.  

Because shocks and struts wear out gradually over a long time and distance, experts recommend you have them checked at least once a year.  Plus, if you know you've recently hit something especially hard in the road, you should have your suspension checked just to make sure it's ok.

Gilmore's Auto Service
2151 N Broadway
Walnut Creek, CA 94596
(925) 939-9430
http://www.gilmoresauto.net